@solid-vibes-standard · joined Oct 17, 2026
Official parts with verified dimensions: ISO / DIN fasteners, inserts, bearings, motors and common dev boards. Drop them into your Things for real-size holes and fits.
Electronics mounts
Pi 5 with the same 58 × 49 mm M2.5 holes, relocated Ethernet and the new MIPI / PCIe connectors.
Solid Vibes StandardElectronics mounts
USB-C receptacle on a small breakout board with the standard 8.94 × 3.26 mm shell for a panel cutout.
Solid Vibes StandardElectronics mounts
Espressif's reference ESP32 board: 48.26 × 27.94 mm PCB, 2 × 19 pins, module antenna overhanging 6 mm. Has no mounting holes.
Solid Vibes StandardGears and motion
The standard 3D-printer stepper: 42.3 mm square, 31 mm M3 hole pattern, ⌀22 pilot and ⌀5 D-shaft. Body lengths 34, 40 and 48 mm.
Solid Vibes StandardGears and motion
Deep-groove radial ball bearing with real bore, outer diameter and width: 608ZZ, 625ZZ, 623ZZ, 6001, 6800-series and more.
Solid Vibes StandardElectronics mounts
5.5 mm PCB barrel jack (PJ-002A style) in 2.1 or 2.5 mm pin sizes, with the wall cutout.
Solid Vibes StandardElectronics mounts
6 × 6 or 12 × 12 mm through-hole push button with selectable stem height and the cap hole to cut.
Solid Vibes StandardElectronics mounts
Standard T-1¾ indicator LED with its ⌀5.8 flange, 8.6 mm height and the panel hole to drill.
Solid Vibes StandardElectronics mounts
1 A single-cell lithium charger on a 26 × 17 mm board, micro-USB or USB-C, with the connector position for a cutout.
Solid Vibes StandardElectronics mounts
Single-cell plastic 18650 holder (≈ 77.5 × 21 × 19.5 mm) with the cell channel and open top.
Solid Vibes StandardElectronics mounts
The workhorse lithium cell: ⌀18.4 × 65 mm (68.5 mm protected), with the pocket size for a holder.
Solid Vibes StandardElectronics mounts
128 × 64 I²C OLED on a 27.3 × 27.8 mm board with the glass, active area and the window to cut.
Solid Vibes StandardElectronics mounts
Common 32 × 24 mm PIR module with the ⌀23 mm Fresnel dome and two M2 holes 28 mm apart.
Solid Vibes StandardElectronics mounts
Classic 45 × 20 mm ultrasonic distance module with two ⌀16 transducers 26 mm apart.
Solid Vibes StandardElectronics mounts
The common purple I²C/SPI temperature, humidity and pressure board with two mounting holes and the sensor position for a vent.
Solid Vibes StandardElectronics mounts
RP2040 / RP2350 Pico family: 51 × 21 mm, four ⌀2.1 holes 47 × 11.4 mm apart, micro-USB, optional headers.
Solid Vibes StandardElectronics mounts
The 65 × 30 mm Zero with 58 × 23 mm holes, mini-HDMI, two micro-USB and the left-edge microSD slot.
Solid Vibes StandardElectronics mounts
Pi 5 with the same 58 × 49 mm M2.5 holes, relocated Ethernet and the new MIPI / PCIe connectors.
Solid Vibes StandardElectronics mounts
Quad-core Pi 4 with exact 58 × 49 mm M2.5 holes and every port position and height for case design.
Solid Vibes StandardElectronics mounts
Breadboard-friendly 43.2 × 17.8 mm Nano with mini-USB; no mounting holes, held by its two 15-pin rows.
Solid Vibes StandardElectronics mounts
Uno R3 (and R4 Minima / WiFi) with the official outline, four ⌀3.2 holes, USB and DC jack positions and the stacking headers.
Solid Vibes StandardElectronics mounts
ESP32-S3 board with dual USB-C: 62.74 × 25.4 mm PCB, 2 × 22 pins, antenna end overhanging. No mounting holes.
Solid Vibes StandardElectronics mounts
Espressif's reference ESP32 board: 48.26 × 27.94 mm PCB, 2 × 19 pins, module antenna overhanging 6 mm. Has no mounting holes.
Solid Vibes StandardGears and motion
Tiny 12 × 10 mm geared DC motor with a ⌀3 D-shaft. Enter the gearbox length of your ratio.
Solid Vibes StandardGears and motion
The tiny geared 5 V stepper from ULN2003 kits: ⌀28 can, 35 mm ears and an offset ⌀5 flatted shaft.
Solid Vibes StandardGears and motion
High-torque standard-size metal-gear servo (40.7 × 19.7 mm) with the 49.5 × 10 mm ear pattern.
Solid Vibes StandardGears and motion
The ubiquitous 9 g blue micro servo: housing, ears, ⌀4.8 spline and the panel opening it needs.
Solid Vibes StandardGears and motion
The standard 3D-printer stepper: 42.3 mm square, 31 mm M3 hole pattern, ⌀22 pilot and ⌀5 D-shaft. Body lengths 34, 40 and 48 mm.
Solid Vibes StandardGears and motion
LM8UU-style linear bearing for smooth rods: LM3UU to LM20UU with bore, outer diameter and length.
Solid Vibes StandardGears and motion
Deep-groove radial ball bearing with real bore, outer diameter and width: 608ZZ, 625ZZ, 623ZZ, 6001, 6800-series and more.
Solid Vibes StandardFasteners
Brass knurled insert you melt into 3D printed parts for real metal threads. Includes the bore, depth and boss to print.
Solid Vibes StandardFasteners
Countersunk Pozidriv wood / chipboard screw, e.g. 3.5 × 16 or 4 × 30, with pilot-hole sizes.
Solid Vibes StandardFasteners
Plain flat washer: normal (ISO 7089) or large / fender (ISO 7093 / DIN 9021).
Solid Vibes StandardFasteners
Metric hex nut (ISO 4032) or thin hex nut (ISO 4035), with the hex pocket size to print for it.
Solid Vibes StandardFasteners
ISO metric machine screw in five heads: socket cap, button, countersunk, pan Phillips and hex bolt. Pick the size, length and head.
Solid Vibes Standard