Tiny 12 × 10 mm geared DC motor with a ⌀3 D-shaft. Enter the gearbox length of your ratio.
Standard: Typical N20 gearmotor. Dimensions follow the manufacturer's datasheet, so holes, bosses and pockets you build around it fit for real.
Use it in your own Things from the Library (Bought pieces), or remix it to make a custom variant.
Set them when you use it in a Thing (“M3 × 12, pan head”), or remix it and change them in the Parameters panel.
| Parameter | Default | Range | What it does |
|---|---|---|---|
gearbox_length | 9 mm | 5 options | Depends on the gear ratio |
body_w | 12 mm | — | Measured on the default size (verified dimension). |
body_h | 10 mm | — | Measured on the default size (verified dimension). |
motor_length |
| 15 mm |
| — |
| Measured on the default size (verified dimension). |
total_length | 24 mm | — | Measured on the default size (verified dimension). |
shaft_d | 3 mm | — | Measured on the default size (verified dimension). |
shaft_length | 10 mm | — | Measured on the default size (verified dimension). |
hole_spacing | 9 mm | — | Measured on the default size (verified dimension). |
Nobody has posted a print yet. Made one? Show it off.
—
No ratings yet
Sign in to rate it.
Sign in to ask a question or leave a comment.
No questions yet. Ask the first one.
Nothing to print: this is a bought part with verified dimensions. Use it in your Things for real-size fits and holes.
Uses
No other listings: N20 gear motor is self-contained.
Used by
Not used in any Thing yet.
e3883b9Verified against Typical N20 gearmotor.
CERN Open Hardware Licence, permissive. Open hardware, permissive: anyone may make, change and sell it, as long as they credit you. Remixes carry this license and credit Solid Vibes Standard automatically.