The tiny geared 5 V stepper from ULN2003 kits: ⌀28 can, 35 mm ears and an offset ⌀5 flatted shaft.
Standard: Fulling 28BYJ48 datasheet. Dimensions follow the manufacturer's datasheet, so holes, bosses and pockets you build around it fit for real.
Use it in your own Things from the Library (Bought pieces), or remix it to make a custom variant.
Set them when you use it in a Thing (“M3 × 12, pan head”), or remix it and change them in the Parameters panel.
| Parameter | Default | Range | What it does |
|---|---|---|---|
can_d | 28 mm | — | Measured on the default size (verified dimension). |
can_h | 19 mm | — | Measured on the default size (verified dimension). |
ear_spacing | 35 mm | — | Measured on the default size (verified dimension). |
ear_hole_d |
| 4.2 mm |
| — |
| Measured on the default size (verified dimension). |
shaft_d | 5 mm | — | Measured on the default size (verified dimension). |
shaft_flat | 3 mm | — | Measured on the default size (verified dimension). |
shaft_length | 10 mm | — | Measured on the default size (verified dimension). |
shaft_offset | 8 mm | — | Measured on the default size (verified dimension). |
box_width | 14.5 mm | — | Measured on the default size (verified dimension). |
box_reach | 17.5 mm | — | Measured on the default size (verified dimension). |
Nobody has posted a print yet. Made one? Show it off.
—
No ratings yet
Sign in to rate it.
Sign in to ask a question or leave a comment.
No questions yet. Ask the first one.
Nothing to print: this is a bought part with verified dimensions. Use it in your Things for real-size fits and holes.
Uses
No other listings: 28BYJ-48 stepper is self-contained.
Used by
Not used in any Thing yet.
d4592d2Verified against Fulling 28BYJ48 datasheet.
CERN Open Hardware Licence, permissive. Open hardware, permissive: anyone may make, change and sell it, as long as they credit you. Remixes carry this license and credit Solid Vibes Standard automatically.