The common purple I²C/SPI temperature, humidity and pressure board with two mounting holes and the sensor position for a vent.
Standard: Typical GY-BME280-3.3 module. Dimensions follow the manufacturer's datasheet, so holes, bosses and pockets you build around it fit for real.
Use it in your own Things from the Library (Bought pieces), or remix it to make a custom variant.
Set them when you use it in a Thing (“M3 × 12, pan head”), or remix it and change them in the Parameters panel.
| Parameter | Default | Range | What it does |
|---|---|---|---|
header | 4 | 3 options | — |
board_length | 15.4 mm | — | Measured on the default size (verified dimension). |
board_width | 11.6 mm | — | Measured on the default size (verified dimension). |
hole_d| 3.2 mm |
| — |
| Measured on the default size (verified dimension). |
hole_spacing_x | 11.2 mm | — | Measured on the default size (verified dimension). |
sensor_x | 2.5 mm | — | Measured on the default size (verified dimension). |
sensor_y | 2.5 mm | — | Measured on the default size (verified dimension). |
pcb_thickness | 1 mm | — | Measured on the default size (verified dimension). |
height_above_pcb | 0.93 mm | — | Measured on the default size (verified dimension). |
overall_x | 15.4 mm | — | Measured on the default size (verified dimension). |
overall_y | 11.6 mm | — | Measured on the default size (verified dimension). |
Nobody has posted a print yet. Made one? Show it off.
—
No ratings yet
Sign in to rate it.
Sign in to ask a question or leave a comment.
No questions yet. Ask the first one.
Nothing to print: this is a bought part with verified dimensions. Use it in your Things for real-size fits and holes.
Uses
No other listings: BME280 breakout (GY-BME280) is self-contained.
Used by
Not used in any Thing yet.
626342eVerified against Typical GY-BME280-3.3 module.
CERN Open Hardware Licence, permissive. Open hardware, permissive: anyone may make, change and sell it, as long as they credit you. Remixes carry this license and credit Solid Vibes Standard automatically.