Electronics mounts
USB-C receptacle on a small breakout board with the standard 8.94 × 3.26 mm shell for a panel cutout.
Solid Vibes StandardElectronics mounts
1 A single-cell lithium charger on a 26 × 17 mm board, micro-USB or USB-C, with the connector position for a cutout.
Solid Vibes StandardElectronics mounts
The workhorse lithium cell: ⌀18.4 × 65 mm (68.5 mm protected), with the pocket size for a holder.
Solid Vibes StandardElectronics mounts
5.5 mm PCB barrel jack (PJ-002A style) in 2.1 or 2.5 mm pin sizes, with the wall cutout.
Solid Vibes StandardElectronics mounts
6 × 6 or 12 × 12 mm through-hole push button with selectable stem height and the cap hole to cut.
Solid Vibes StandardElectronics mounts
Standard T-1¾ indicator LED with its ⌀5.8 flange, 8.6 mm height and the panel hole to drill.
Solid Vibes StandardElectronics mounts
Single-cell plastic 18650 holder (≈ 77.5 × 21 × 19.5 mm) with the cell channel and open top.
Solid Vibes StandardElectronics mounts
128 × 64 I²C OLED on a 27.3 × 27.8 mm board with the glass, active area and the window to cut.
Solid Vibes StandardElectronics mounts
Common 32 × 24 mm PIR module with the ⌀23 mm Fresnel dome and two M2 holes 28 mm apart.
Solid Vibes StandardElectronics mounts
Classic 45 × 20 mm ultrasonic distance module with two ⌀16 transducers 26 mm apart.
Solid Vibes StandardElectronics mounts
The common purple I²C/SPI temperature, humidity and pressure board with two mounting holes and the sensor position for a vent.
Solid Vibes StandardElectronics mounts
RP2040 / RP2350 Pico family: 51 × 21 mm, four ⌀2.1 holes 47 × 11.4 mm apart, micro-USB, optional headers.
Solid Vibes StandardElectronics mounts
The 65 × 30 mm Zero with 58 × 23 mm holes, mini-HDMI, two micro-USB and the left-edge microSD slot.
Solid Vibes StandardElectronics mounts
Pi 5 with the same 58 × 49 mm M2.5 holes, relocated Ethernet and the new MIPI / PCIe connectors.
Solid Vibes StandardElectronics mounts
Quad-core Pi 4 with exact 58 × 49 mm M2.5 holes and every port position and height for case design.
Solid Vibes StandardElectronics mounts
Breadboard-friendly 43.2 × 17.8 mm Nano with mini-USB; no mounting holes, held by its two 15-pin rows.
Solid Vibes StandardElectronics mounts
Uno R3 (and R4 Minima / WiFi) with the official outline, four ⌀3.2 holes, USB and DC jack positions and the stacking headers.
Solid Vibes StandardElectronics mounts
ESP32-S3 board with dual USB-C: 62.74 × 25.4 mm PCB, 2 × 22 pins, antenna end overhanging. No mounting holes.
Solid Vibes StandardElectronics mounts
Espressif's reference ESP32 board: 48.26 × 27.94 mm PCB, 2 × 19 pins, module antenna overhanging 6 mm. Has no mounting holes.
Solid Vibes Standard