Set them when you use it in a Thing (“M3 × 12, pan head”), or remix it and change them in the Parameters panel.
| Parameter | Default | Range | What it does |
|---|---|---|---|
width | 76 mm | 40–200 mm | — |
depth | 52 mm | 30–150 mm | — |
height | 30 mm | 15–100 mm | — |
wall_thickness | 2 mm | 1.2–4 mm | — |
lid_thickness | 3 mm | 2–6 mm | — |
knuckle_radius |
Used in 1 Thing
No prints posted yet
76 × 63.4 × 33 mm
2 pieces
Published Oct 17, 2026
| 3.5 mm |
| 2.5–6 mm |
| — |
hinge_gap | 0.4 mm | 0.2–0.8 mm | — |
Nobody has posted a print yet. Made one? Show it off.
—
No ratings yet
Sign in to rate it.
Sign in to ask a question or leave a comment.
No questions yet. Ask the first one.
Prints well
FDM on a Bambu-style 256 in PLA · needs supports · about 1 h 12 min · 51 g
No issues found
Uses
No other listings: Cfggjijaafea sized box is self-contained.
Used by
Used in 1 Thing (private Things are only counted).
7396191First release
CERN Open Hardware Licence, permissive. Open hardware, permissive: anyone may make, change and sell it, as long as they credit you. Remixes carry this license and credit Cora Configs automatically.